1-piece reduce port bore 1000wog 1000psi pn63 locking handle ball valve
- SS304 (CF8/1.4301/SCS13) /SS316 (CF8M/1.4401/SCS14) /WCB
- Reduce Port/Reduce Bore
- BSPT/BSPP/NPT/DIN259/DIN2999 threaded
- T/T, L/C
Main Parts and Material
1. Body SS304/SS316/SS201
2. Cap SS304/SS316/SS201
3. Seat PTFE/PPL/RPTFE
4. Washer PTFE/PPL/RPTFE
5. Packing PTFE/PPL/RPTFE
6. Gland SS304/SS316
7. Handle Cover PTFE/PPL/RPTFE
8. Stem SS304/SS316
1. The fluid resistance is small, and its resistance coefficient is equal to that of the same length of pipe section.
2. Simple structure, small volume and light weight.
3. It is tight and reliable. At present, the sealing surface material of ball valve is widely used in plastic,
with good sealing performance, and also widely used in vacuum system.
4. It is easy to operate and fast to open and close. It only needs to rotate 90 ° from full open to full close,
which is convenient for remote control.
5. The maintenance is convenient, the ball valve structure is simple, the sealing ring is generally movable,
and the disassembly and replacement are relatively convenient.
6. When the valve is fully open or closed, the sealing surface of the ball and the valve seat shall be isolated from the medium.
When the medium passes through, the corrosion of the valve sealing surface will not be caused.
7. It has a wide range of applications, ranging from small diameter to several millimeters and large diameter to several meters,
from high vacuum to high pressure. When the ball rotates 90 degrees, it should be spherical at the inlet and outlet, so as to cut
off the flow.
We will deliver the goods within 30-60 days after we received your order from Ningbo Port or Shanghai Port. But the delivery time according to the size of your order. We usually accept 30% in advance by T/T. The balance should be paid before shipment, If you would like other payment practice, you can contact us to get more details.
After the quality inspection of the finished product, each valve is individually packed by PP bag. The number of cartons is determined according to the specification of the valve. After the final spot check and inspection, the cartons are sealed with labels and packed into plywood boxes.
We make the following commitments to product quality and we try our best to serve our customers. If there is any problem with the product,we accept no reason to return or exchange within 15 days. However, the buyer shall ensure that the returned goods meet the original conditions. If the goods are damaged or lost in return, the buyer will be responsible for the expenses incurred by the damage or loss of the products.
A ball valve is a flow control device which uses a hollow, perforated and pivoting ball to control liquid flowing through it. It is open when the ball's hole is in line with the flow inlet and closed when it is pivoted 90-degrees by the valve handle, blocking the flow. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. The shut position 1/4 turn could be in either clockwise or counter-clockwise direction.
Q: What should we pay attention to when using valves?
1. The rotating position of valve handle shall be reserved.
2. It cannot be used as throttling.
3. The ball valve with driving mechanism shall be installed vertically.
Q: How is the price of this product positioned?
Our price is based on the size and type of the product and the material of the product. If you can provide information, we can give you an estimated price for your reference.
Q: May I visit your factory?
Yes, we welcome you to visit our factory.